3D Printing (Prusa MK4): Makerspace Staff will give a total project cost and time estimate before print begins.
- PLA Filament – $0.10 per gram
Laser Cutting or Engraving (xTool): Machine is free to use if patron supplies their own materials but there are limitations so please check with Makerspace staff and get approval for use prior to cut.
- Wood Panel – $10 (12×12 Inches)
- Acrylic Panel – $15 (12×12 Inches)
- Masking Sheet – $0.25 per inch (length)
- Anodized Aluminum Business Cards – $3.00
- Stainless Steel Tags – $3.00
Vinyl or Paper Cutting (Cricut Maker 3): Machine is free to use if patron supplies their own materials but there are limitations so please check with Makerspace staff and get approval for use prior to cut.
- Vinyl $0.25 per inch (length)
- Transfer Tape $0.25 per inch (length)
- Plain Paper – $0.25 per sheet (letter size)
- Cricut Insert Card Set – $1.00
- Cardstock – $0.40 per sheet (letter size)
- Sticker Paper $1.00 per sheet (letter size)
Mug Press (Cricut): Machine is free to use if patron supplies their own materials but there are limitations so please check with Makerspace staff and get approval prior to use.
- 15 oz Mug – $5.00
- Sublimation Print $5.00 (letter size)
- Cricut Mug Wraps – $5.00
Heat Press (EasyPress): Machine free to use if patron supplies their own materials but there are limitations so please check with Makerspace staff and get approval prior to use.
- Cricut Infusible Ink Sheets – $1.00 per inch (length)
- Iron-On Vinyl Sheets – $0.50 per inch (length)
- Printable Heat Transfer Paper – $2.00 (letter size)
Sewing or Quilting:
- Sewing Bobbin (Plastic) $1.00 (this helps cover cost of thread). No fabric is available.
Large Format Printer: Note – this is for prints larger than 11×17; any smaller prints can be sent to our library photocopier at a cost of $.025 for black & white or $1.00 for colour.
- Plain Paper Roll $7.00 per print
- Matte /Glossy Photo Paper Roll $10.00 per print
Lamination:
- Lamination Pouch – $1.00
Button Maker:
- $0.25 per button